With the rise of the emerging intelligent media advertising industry, combined with the Internet information age, the LCD advertising player has risen rapidly in domestic and foreign markets with its advantages of simple operation and management, low investment cost, powerful function and long service life. Any equipment has a specific service life, and the LCD advertising player is no exception. In order to reduce equipment failures and prolong service life, correct daily maintenance is very important. Proper operation and proper maintenance are not only conducive to the service life of the LCD advertising player, but also conducive to saving the later maintenance cost! So how to use and maintain the liquid advertising player so as not to cause failure and aging? Next, Layson will share the maintenance tips of the LCD advertising player to the majority of LCD advertising player users.
1. Attention shall be paid to socket selection
The LCD advertising player has a rated power during operation. If the selected power socket is of poor quality, the voltage without voltage regulator is unstable, or the voltage is too high or too low beyond the floating range of the machine, the chip of the advertising player will be damaged or stop running. Therefore, please use a relatively high quality power on socket, preferably an independent socket.
2. Precautions for switching on / off
Many electronic products do not pay much attention to switching on and off in the process of normal use. In fact, the LCD advertising player is also one of the electronic products. Even if the machine itself uses industrial control accessories, its service life will be greatly reduced if it runs carelessly. When forced shutdown is necessary, do not start the machine immediately after forced shutdown. Please ensure a three minute interval! During the operation of the machine, the chip is working and the hard disk is reading data. If the power supply is suddenly cut off, it is easy to cause irreparable damage to the hardware.
3. It is recommended to restart regularly
Although the LCD advertising player can support long-term uninterrupted operation, in order to prolong its service life, we can restart the machine at regular intervals at a fixed time. After restarting, the device will automatically clean the cache to reduce CPU consumption, so as to make the device operate more efficiently. Although the advertising player supports 7*24 hours of working time, it is recommended that the continuous use should not exceed 7*24 hours. In order to ensure the service life of the machine, it is better to be cautious!
4. The place shall be moisture-proof
The operating environment of the LCD advertising player should be dry. You should know that the electronic products should only be kept dry and avoid working in a humid environment! Because the humid environment is easy to cause the equipment to be affected with moisture, the components in the machine are easy to rust, leading to the corrosion of the liquid crystal electrode, affecting the circuit short circuit, use function and service life. Therefore, the LCD advertising player should be placed in a dry space as far as possible, and should not run in strong light and sunlight. Strong light and sunlight are easy to damage the appearance of the machine, and the shell is aging and damaged, seriously causing damage to external components and affecting the visual effect of the advertising player screen. If the equipment is not used for a long time, it must be powered on regularly for a period of time and then shut down. For electronic products, if the equipment is powered off for a long time, it will age or slow down.
5. Avoid weight pressure impact
Do not apply pressure to the display surface of the LCD advertising player. The LCD advertising player screen is very delicate and fragile, so it is necessary to avoid strong impact and vibration. The LCD advertising player contains many glass and sensitive electrical components. Falling on the floor or other similar strong impact will cause damage to the advertising player screen and other units. When the equipment fails, do not disassemble it blindly. If you do not know, it may cause other damage. In case of any fault, contact professional and technical maintenance personnel for maintenance and treatment in time to prevent unnecessary damage caused by improper treatment.
6. Pay attention to cleaning and scrubbing
In daily life, we must keep the habit of "cleaning" the LCD advertising player regularly. The LCD advertising player that has been running in public places for a long time is easy to accumulate dust and dirt, which not only affects the appearance of the machine, but also has a great impact on the performance of the machine for a long time. Therefore, it is necessary to clean the machine regularly.
When cleaning the LCD screen, try to use clean water or special LCD screen cleaner to spray it on the LCD advertising player screen, and then gently wipe it with a clean white cloth. Try to use soft wipes such as spectacle cloth and lens paper to scrub the LCD screen to avoid unnecessary scratches on the screen. Try not to use wet cloth with too much moisture. The wet cloth with too much moisture is easy to make the moisture stay on the screen. Entering the screen through the edge water can cause a short circuit of the system, which will cause the LCD advertising player to fail to work normally.
When cleaning the dirt on the shell, do not use strong corrosive liquid, because the shell is made of hardware materials, so as to avoid corrosion of the plating and painting of the surface. Just wipe it with a dry wet towel. It is also worth noting that when cleaning the power supply fan, make sure that the machine is turned off. After scrubbing, you must wait until it is completely dry before powering on.
If you want to effectively extend the service life of the LCD advertising player, you need to pay attention to the usual maintenance and operation!
Post time: Jun-27-2022